SAP BI Global report variable User Exit modularization

Share Button

SAP BI Global report variable User Exit modularization

Summary

In an SAP BI Project, along with new reporting needs, new requirements for Global Report Variables of the type customer exit are generated. It is typical then for the respective user exit code to grow to a few thousand lines, resulting in code that is hard to manage, debug, and use in a multi-team environment.

Background

SAP BI is a Business Warehouse in which data models are created to support the extraction, transformation, load and reporting. When designing a report, some requirements have certain complexity that lead to the creation of custom exit code global report variables. For example, a user enters a month and the report requires an interval created for the ‘quarter to date’ of the entered month: the user entered May 2008, the report requires a variable that reflects the interval Apr-May 2008 (Q2-2008). This type of variable requires a ‘custom exit’ code. SAP has traditionally provided for custom code enhancements in the form of user exits and recently in the form of BADI (Business Add-In). Basically a user exit is an include in a function module that can be modified by the customer. The user exit FM for Global Report Variables EXIT_SAPLRRS0_001 tends to grow in a single piece of code and its maintenance become cumbersome.

Modularization

Modularization has advantages

  • .The code is easier to read. Instead of scrolling through pages and pages of code, just go to a specific form in a program
  • If the code modules are independent, the local use of variables reduces the interference between developers. Also, developers can be working on a specific module without interfering with each other. The standard approach based on multiple ‘case’ statements and ‘if’ statements for i_vnam makes it hard to ‘know’ if you are inserting the code in the right place.
  • The current approach goes through all the code to find the variable. A new approach could call the specific module directly.

Dynamic ‘PERFORM’ Command

The basis for this modularization approach is a dynamic ‘PERFORM’ command. Based on the variable, it performs a specific form in an ABAP/4 report with a name made of a standard preffix and the variable name, for example, ZBW_ZXRSRU01_<vnam>_REP. In a dynamic call for a PERFORM command, the ABAP/4 code will fail with a short dump if the report / form does not exist unless there is a ‘IF FOUND’ addition to the code line.

The approach is to ‘migrate’: start moving variables to the dynamic perform command step by step. A variable E_VAR_PROCESSED is set in the form to ‘tell’ that the calculation was made and no need to continue through the ‘old’ code. In case there is no form/report for the specific variable, it will continue through the old code. Define a custom executable ABAP/4 report in transaction SE38 and create one report per custom-exit global report variable. The form in the report will have exactly the same interface as the user exit function module plus a exporting parameter ‘E_VAR_PROCESSED’ as mentioned above:

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
(..)
FORM zbw_zxrsru01_var_form
  USING
    i_vnam          LIKE rszglobv-vnam
    i_vartyp        LIKE rszglobv-vartyp
    i_iobjnm        LIKE rszglobv-iobjnm
    i_s_cob_pro     TYPE rsd_s_cob_pro
    i_s_rkb1d       TYPE rsr_r_rkb1d
    i_periv         TYPE rro01_s_rkb1f-periv
    i_t_var_range   TYPE rrs0_t_var_range
    i_step  TYPE i
   CHANGING
    e_t_range       TYPE rsr_t_rangesid
    e_meeht         LIKE rszglobv-meeht
    e_mefac         LIKE rszglobv-mefac
    e_waers         LIKE rszglobv-waers
    e_whfac         LIKE rszglobv-whfac
    e_var_processed TYPE c
    c_s_custome TYPE rro04_s_customer.
(...)

In the form code below, the current month is calculated based on the system date (only for illustration purposes, there is a standard SAP exit variable for that).

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
TYPE-POOLS: rs, rsr, rro01, rrke, rrs0, sydes, rsbbs.
*----------------------------------------------*
*      Form  ZBW_ZXRSRU01_VAR_FORM
*----------------------------------------------*
*       text
*----------------------------------------------*
FORM zbw_zxrsru01_var_form
 USING
   i_vnam LIKE  rszglobv-vnam
   i_vartyp      LIKE  rszglobv-vartyp
   i_iobjnm      LIKE  rszglobv-iobjnm
   i_s_cob_pro   TYPE  rsd_s_cob_pro
   i_s_rkb1d     TYPE  rsr_s_rkb1d
   i_periv       TYPE  rro01_s_rkb1f-periv
   i_t_var_range TYPE  rrs0_t_var_range
   i_step        TYPE  i
 CHANGING
   e_t_range       TYPE  rsr_t_rangesid
   e_meeht         LIKE  rszglobv-meeht
   e_mefac         LIKE  rszglobv-mefac
   e_waers         LIKE  rszglobv-waers
   e_whfac         LIKE  rszglobv-whfac
   e_var_processed TYPE c
   c_s_customer    TYPE  rro04_s_customer.
 
  CONSTANTS:
    c_eq(2) TYPE c VALUE 'EQ',
    c_i(1)  TYPE c VALUE 'I',
    c_x(1)  TYPE c VALUE 'X',
    c_1     TYPE i VALUE 1.
 
  DATA:
    lv_curr_date TYPE sy-datum,
    lv_cur_month TYPE c LENGTH 6,
    s_range      TYPE rsr_s_rangesid.
 
  IF i_step = c_1.
 
    lv_curr_date = sy-datum.
    lv_cur_month = lv_curr_date+4(2).
 
    CONCATENATE lv_curr_date+0(4) lv_cur_month INTO s_range-low.
 
    s_range-opt  = c_eq.
    s_range-sign = c_i.
    APPEND s_range TO e_t_range.
  ENDIF.
 
  e_var_processed = c_x.
 
ENDFORM.                    "ZBW_ZXRSRU01_VAR_FORM

Code for the dynamic PERFORM command is attached after the code below, dynamic perform command, this code is inserted at the beginning of include zxrsru01

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
(...)
 
 lv_form   type string,
 lv_report type string.
 
*STEP = 3 - Called after all variable processing and gets called only once
*and not per variable. Here you can validate the user entries.
*
*This code won't execute for step 3 as there is no variable passed
CLEAR lv_var_proc.
IF i_step = 3.
  IF NOT i_s_rkb1d-infocube IS INITIAL.
    CONCATENATE 'ZBW_ZXRSRU01_' i_s_rkb1d-infocube '_REP'  INTO lv_report.
    lv_form = 'ZBW_ZXRSRU01_VAR_FORM'.
    PERFORM (lv_form) IN PROGRAM (lv_report)
      USING
        i_vnam
        i_vartyp
        i_iobjnm
        i_s_cob_pro
        i_s_rkb1d
        i_periv
        i_t_var_range
        i_step
      CHANGING
        e_t_range
        e_meeht
        e_mefac
        e_waers
        e_whfac
        lv_var_proc
        c_s_customer
      IF FOUND.
  ENDIF.
ELSE.
  CONCATENATE 'ZBW_ZXRSRU01_' i_vnam '_REP'  INTO lv_report.
  lv_form = 'ZBW_ZXRSRU01_VAR_FORM'.
  PERFORM (lv_form) IN PROGRAM (lv_report)
    USING
      i_vnam
      i_vartyp
      i_iobjnm
      i_s_cob_pro
      i_s_rkb1d
      i_periv
      i_t_var_range
      i_step
    CHANGING
      e_t_range
      e_meeht
      e_mefac
      e_waers
      e_whfac
      lv_var_proc
      c_s_customer
    IF FOUND.
ENDIF.
IF NOT lv_var_proc IS INITIAL.
  EXIT.
ENDIF.
 
(...)

Useful Function Modules for Global Report Variables

Where used list

Function module RSZ_X_WHERE_USED_LIST_GET finds where a report element is used. To get where a global report variable is used, enter the value from table RSZGLOBV, field VARUNIID as the import parameter I_ELTUID in the function module. (field VNAM contains the ‘readable’ variable technical name).
The table E_T_WHERE_USED_LIST will contain the list of queries that use the variable.

Variable test

Function Module RRS_VAR_VALUES_EXIT_FILL executes a global report variable user exit. As some of the variables execute in a specific step (i_step) it may need some break points and data manipulation to have the variable executed.

Code for standard ‘SAP’ exit variables

Function Module RREX_VARIABLE_EXIT has the code for SAP exit global report variables. If the variable is not ‘solved’ in this part of the code, it may execute at the end of this FM code as a RSVAREXIT_<varname>. For example RSVAREXIT_0I_CUFQU executes the code for variable 0I_CUFQU ‘Current Quarter of Fiscal Year (SAP Exit)’, resulting in a fiscal period interval for the current fiscal quarter.

Refresher on I_STEP

The global report variable user exit EXIT_SAPLRRS0_001 has I_STEP as an input parameter. You normally develop the custom code for a specific step, as explained below. It is useful to know the function modules involved when debugging, to set an appropriate break-point.

  • I_STEP = 0. This step is not called during report execution but when a report variable is used in an InfoPackage
    • I_STEP = 1 – Called prior to processing of variable pop-up and for each “customer exit” variables. Can be used to fill variable with default values. Function module EXIT_SAPLRRS0_001 is called with I_STEP = 1 in function module RRS_VAR_VALUES_EXIT_BEFORE
Step 1
Step 1
  • I_STEP = 2 – Called after the processing of the variable pop-up. Only for those variables that are not
    marked as “ready for input” or are set to “mandatory variable entry”. . Function module EXIT_SAPLRRS0_001 is called with I_STEP = 2 in function module RRS_VAR_VALUES_EXIT_AFTER

It is important to remember that if a variable is filled in STEP 1 it will not be processed on STEP 2.

Step 2
Step 2
  • I_STEP = 3 – Called after all variable processing and gets called only once and not per variable. Here you
    can validate the user entries. Function module EXIT_SAPLRRS0_001 is called with I_STEP = 3 in function
    module RRS_VAR_VALUES_EXIT_CHECK.
STEP 3
STEP 3

SAP, R/3, SAP NetWeaver, Duet, PartnerEdge, ByDesign, SAP Business ByDesign, and other SAP products and services mentioned herein as well as their respective logos are trademarks or registered trademarks of SAP AG in Germany and other countries.

Share Button

Leave a Reply

Your email address will not be published. Required fields are marked *